Search for: All records

Grain boundaries are critical in determining the properties of materials, including mechanical stability, conductivity, and corrosion resistance. The specific properties of materials depend not only on the misorientation of the crystals, the three most commonly characterized parameters, but also on the angle of the grain boundary plane between the two crystals, the final two parameters in the five-parameter macroscopic description of the grain boundary. The method presented here allows for the direct measurement of all five parameters of the grain boundary in a transmission electron microscopy specimen of various morphologies. This is especially applicable to atom probe specimens, where only a single-tilt axis is generally available, allowing the crystallographic description to be matched to the detailed chemical data available in the atom probe tomography. This method provides a platform for efficient grain boundary analysis in unique samples, saving operator time and allowing for ease of acquisition and interpretation in comparison with traditional electron diffraction methods.

 

Al x CoCrFeNi High Entropy Alloys (HEAs), also referred to as multiprincipal element alloys, have attracted significant interest due to their promising mechanical and structural properties. Despite these attributes, Al x CoCrFeNi HEAs are susceptible to phase separation, forming a wide range of secondary phases upon aging, including NiAl–B2 and Cr-rich phases. Controlling the formation of these phases will enable the design of age-hardenable alloys with optimized corrosion resistance. In this study, we examine the critical role of Al additions and their concentration on the stability of the CoCrFeNi base alloy, uncovering the connections between Al composition and the resulting microstructure. Addition of 0.1 mol fraction of Al destabilizes the single-phase microstructure and results in the formation of Cr-rich body-centered-cubic (bcc) phases. Increasing the composition of Al (0.3–0.5 mol fraction) results in the formation of more complex coprecipitates, NiAl–B2 and Cr-rich bcc. Interestingly, we find that the increase of the Al content stimulates the formation of NiAl–B2 phases, increases the overall density of secondary phases, and influences the content of Cr in Cr-rich bcc phases. Density functional theory calculations of simple decomposition reactions of Al x CoCrFeNi HEAs corroborate the tendency for precipitate formation of these phases upon increased Al composition. Additionally, these calculations support previous results, indicating the base CoCrFeNi alloy to be unstable at low temperature. This work provides a foundation for predictive understanding of phase evolution, opening the window toward designing innovative alloys for targeted applications. 

MXenes have shown promise in myriad applications, such as energy storage, catalysis, EMI shielding, among many others. However, MXene oxidation in aqueous colloidal suspensions when stored in water at ambient conditions remains a challenge. It is now shown that by simply capping the edges of individual MXene flakes, Ti₃C₂T_zand V₂CT_z, by polyanions such as polyphosphates, polysilicates or polyborates, it is possible to quite significantly reduce their propensity for oxidation even when held in aerated water for weeks. This breakthrough resulted from the realization that the edges of MXene sheets are positively charged. It is thus an example of selectively functionalizing the edges differently from the MXene sheet surfaces.

 

MXenes have shown promise in myriad applications, such as energy storage, catalysis, EMI shielding, among many others. However, MXene oxidation in aqueous colloidal suspensions when stored in water at ambient conditions remains a challenge. It is now shown that by simply capping the edges of individual MXene flakes, Ti₃C₂T_zand V₂CT_z, by polyanions such as polyphosphates, polysilicates or polyborates, it is possible to quite significantly reduce their propensity for oxidation even when held in aerated water for weeks. This breakthrough resulted from the realization that the edges of MXene sheets are positively charged. It is thus an example of selectively functionalizing the edges differently from the MXene sheet surfaces.